Covering all of ever developing needs of the tool designers, tool makers and moulders is a never ending effort we at DME are fully dedicated to. To fulfill our customers’ expectations and needs, we are introducing another major extension of our mould components range.

Covering all of ever developing needs of the tool designers, tool makers and moulders is a never ending effort we are fully dedicated to. To fulfill our customers' expectations and needs, we are introducing another major extension of our mould components range.


Check our novelties in a brand new minicatalogue!


Further extension to our components range

We are excited to announce an addition to our portfolio of Collapsible Cores. The new S-Collapsible Core brings you extended options for designing your mould.

S-Collapsible Cores by DME gives you **an improved design bringing never seen before product performance** to you. This new design provides significantly more space for undercuts between the guide and the outer contour. In addition to this the S-Collapsible Core can be moved completely to the end of the stroke without the corners of the slide colliding with each other.
With it being **completely flat on the back, this new variant of core is so much easier to configure into your mould design**. As a designer much more freedom is given when the mould is being developed, it can be as efficient and easy to maintain as possible.


DME is able to deliver these new S-Collapsible cores in **multiple variants, 6, 8 or 12 segments**, depending on your needs and diameter of the injected part.
If you are interested in this product, please contact our [customer service](https://dmeeu.com/contact)
team for more information or assistance with an order.




DME presents new Collapsible S-Cores

DME presents you a new product line – Precision Cutting Machines. Every tool shop can benefit from its own cut-to-length machine to make on site customisation so easy.

Every tool shop can benefit from its own cut-to-length machine to make on site customisation so easy. Our new ranges offer a wide range of cutter types., the basic robust solutions to more advanced technology based on your specific equipment needs.


You can check these new products on our eSTORE, where they are also avaiable to buy.


DME presents Precision Cutting Machines

We have added new date and QR inserts. Products are immediately available from our representatives and on our eSTORE.

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2022. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. **Selected items are available for a special price - special offer is valid for a limited time period.**

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts)

Introducing date stamps and inserts for 2022

We have introduced two unique solutions for moulding industry.

**Next to expanding our range of standard components in 2021**, we introduced two unique market changing solutions: Accualign Lifter and Premium Collapsible S-Cores.

[Accualing Lifters](https://www.dmeeu.com/page/23-dme-accualign-lifter-for-ejecting-difficult-undercuts) are our best lifters for ejecting parts with undercuts. They offer greatly improved reliability and deliver more options in mould design.

The breakthrough solution for molding undercuts is [Premium Collapsible S-Core](https://www.dmeeu.com/page/26-dme-s-core-premium-collapsible-cores). Collapsible S-Cores from DME deliver more options for mould design and faster cycle times for moulders. You can also mould more complex parts in one cycle than before.

**Both products are available exclusively from DME**. Feel free to contact your local DME representative if you have any questions about any product from our portfolio.

The best from 2021

More possibilities for building your moulds.

Mould Guiding solutions range is expanded with new types and sizes of ejection pins and sleeves, locating rings, shoulder screws, retainers for inclined pin or cotter with wear plate.

In components extension catalogue, you will find NEW:
- Guiding Units
- Ejection Units
- Interlocks
- Screws
- Pins, plugs and baffles for mould cooling systems

Get more options when designing your mould with broadened selection of DME mould components.

[Leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/Components_extension_4th_EN_b5cf4e3b1f.pdf)
[eSTORE](https://store.dme.net/new-components-extension-february-2022-1)

Components extension 1/2022

Europe’s most popular mould standard now by DME

Europe’s most popular standard now available - Introducing K-Series Plates from DME! 

To aid your design flexibility we have made a major addition to our drilled plates range with brand new K-Series plates. DME offers the full range of Europe's most preferred mould standard.  With around 1500 variants and a wide choice of steel grades we are ready to support any application.

Along with short lead times we have the widest range of components and accessories in the industry, DME proves once again to be your One-Stop-Shop of choice.

YOUR BENEFITS
- Modular system
- Top quality steel
- Maximum availability
- Flexibility of design
- High precision guiding elements

Check out the new K-Series on our [eSTORE](https://store.dme.net/k-series-euro).

[PDF Leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_kseries_aae822ae45.pdf)


Introducing K-Series plates

Faster set up, more secure and convenient to use.

Remote Date Stamps make set up and control of the stamp setting easier, but also deliver reduced downtime and risk of damage to the cavity when operating the stamp. Making them a premium choice amongst the date stamps.

**Remote Date Stamps from DME feature:**
- External visibility of the date stamp setting
- Eliminates possible scratching to the cavity during stamp updating
- Included nut allows easy height adjustment to get the perfect visual appearance on the part

[Buy on eSTORE](https://store.dme.net/fr-remote-date-inserts)

Introducing Remote date stamps

DME is introducing a new range of standard cooling components that are well known and established at DME USA. They are of the highest quality as you have come to expect, with many benefits:
- Increased selection
- Fast deliveries
- Top Quality
- Great value

You can choose from a wide selection of types and sizes on our [eSTORE](https://store.dme.net/mould-cooling-dme-usa-system).

Introducing DME USA system

Remind yourself of our best new products from 2022

In 2022 we added many additions to the DME range, some small and some large, but all very important to show how we continue to expand our range. This makes thousands of new items overall, here we pick those we consider to be the most interesting for you.

We further increased our standard mould range by introducing new [K-Series](https://store.dme.net/k-series-euro), this range covers Europe's most preferred standard of drilled mould plates. A broad selection of standard sizes, steel types and a fast service - these are the main benefits of K-Series, which will bring you a significant boost in design and time flexibility when choosing DME.

For better plate control, we introduced [EZ-Latch Locks](https://www.dmeeu.com/page/68-dme-ez-latch), these external latch locks are a universal solution for mould plates control. They allow you to enhance your design options as well as reduce tooling costs, EZ-Latch Locks are ready to mount straight out of the box.

And don't forget [iControl](https://www.dmeeu.com/page/230-dme-i-control-hot-runner-insulation), our brand new solution for energy savings when using Hot Runner systems. Introduced recently, October 2022, it has already become a bestseller that allows you to save energy costs.



The best of 2022

Minimize thermal variation, reduce cycle time, cold spots and lower your energy requirements. Reach these benefits with iControl, a breakthrough solution for improving thermal management in your mould.

[Read More](https://www.dmeeu.com/page/230-dme-i-control-hot-runner-insulation)

iControl hot runner insulation

Top quality and performance is what you get with new ME Series and M2+ Series Temperature Controllers for hot runner systems.

Top quality and performance is what you get with new ME Series and M2+ Series Temperature Controllers for hot runner systems. Choose ME Series for top value applications in low to mid complex moulds or choose M2+ Series for the most demanding applications.


### Smart Series Me
The ME controller platform combines essential features with advanced APS Technology for precision hot runner temperature control. Powerful performance from a compact unit that helps improve part quality and minimize scrap. Optimize the performance of any hot runner system and unlock your operations full potential. ME Series is ideal for low to mid- complex moulds, it comes with excellent value and delivers reduction in time and energy demands for each cycle.
[Learn more](https://www.dmeeu.com/page/295-hot-runner-temperature-controller-me-series)


### Smart Series M2+
A fully featured controller platform with advanced capabilities for superior moulding performance. Well suited for tight process control on all co-injection applications, it is your best choice as a direct replacement for many existing outdated controller platforms.
[Learn more](https://www.dmeeu.com/page/296-hot-runner-temperature-controller-m2-plus-series)

Smart Series Temperature Controllers

The next generation stack mould plate control

The advanced patented design of the new DME Ball Screw Centering Device provides precise movement and reduced friction for a smooth open/close of your stack mould.

DME has deployed the same precise engineering concept used for years in CNC machining. This unit is easily custom fit to your application with off-the-shelf availability. A simple cut to length to the mould stack height and bolt on features allow for quick and easy installation with drastically reduced lead times. With up to 2 meters per second open rate, there will be no restrictions on cycle time.

[Learn more](https://www.dmeeu.com/page/297-dme-ez-stack-ball-screw-centering-device)

EZ Stack Ball Screw Centering Device

We are introducing hundreds of new items in this major component extension.

Our range of compression springs now includes round wire springs with load from light to very heavy. The range of guiding elements for the sliders is extended with standard Guiding stocks, Self-lubricated guiding stocks and Self lubricated slide plates.

New solutions for connection between sliders and hydraulic cylinder such as Coupling set for hydraulic cylinder or separately Coupling pin for hydraulic cylinder and Counter piece for coupling pin are now available. In addition we have implemented Shims for installation in parting line in Round and Rectangular shapes. For safe manipulation with the mold you can choose our newly added Tool safety device or part of adjustable lifting device Distance bolt. To solve the cable management on molds we have introduced Cable retainers.

Further, for fixation of cavity and core insert in frames we are delivering Position wedges in wide range of dimensions. Two new types of our Linear ball bearings for ejection packets provide you more options in mold design. Cooling range expanded to include Extensions pipe with thread. Our portfolio of retainers is also extended with Spring-loaded locking screw with higher spring force.

[Buy in eSTORE](https://store.dme.net/new-components-extension-march-2023?utm_source=dmeeu&utm_medium=referraleu)

Components Extension March 2023

Find everything from our MRO portfolio at a glance. Enhanced with the new products and solutions for your toolroom, DME WORKSHOP EQUIPMENT catalogue is an industry must have. Providing all you need for maintenance, polishing and process control.

[To the catalogue](https://www.dmeeu.com/dme-files/catalogues-flip/MRO-EN/DME-Workshop-Equipment-Catalogue-2023-EN.html#p=1)

Workshop Equipment Catalogue

Available in a wide range of sizes and steel types

Steel bars are an important addition to our range as they are essential when you need steel material at a predefined size to use in the mould you are working on.

Select from different sizes, save material & reduce waste this will help lower the number of tasks you need to perform in your toolshop.

[Buy in eSTORE](https://store.dme.net/flat-and-round-steel-bars-eu?utm_source=dmeeu&utm_medium=referraleu&utm_campaign=news-article&utm_content=bars)

Round and Flat Steel Bars

The world‘s first fully integrated vario system.

The world‘s first fully integrated vario system Variotherm brings you an optimized way of heat exchange in your mould. With Variotherm, you can save a considerable amount of energy and speed up the whole process at the same time.

**Variotherm key benefits:**
- reducing cycle time
- improving parts quality
- reducing energy consumption
- lowering maintenance costs
- digital connectivity

Variotherm is compatible with any mould cooling/heating application, but delivers the best results with conformally cooled moulds.

[Learn more](https://www.dmeeu.com/page/324-variotherm-technology)

Variotherm technology

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2024. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. **Selected items are available for a special price - special offer is valid for a limited time period.**

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts?utm_source=dmeeu&utm_medium=referraleu)
[Promo leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_ds24promo_eur_d904e9bfef.pdf)

Promo - 2024 date stamps and inserts

Made from high-grade stress-relieved steel, our plates ensure reliable quality even for your most demanding projects. Our standard sizes offer exceptional value and a broad range of steels to meet your specific needs.

Moreover, they perfectly match with DME's high precision components, ensuring seamless integration and superior performance.

Choose DME's K and F series, Europe most popular mould standards, for quality and efficiency.

We have significantly improved our K and F standard drilled plates offer

Highly Economical Standardized System For Simple Commodity Applications

We are pleased to announce the availability of the EcoONE-Series hot runner system, a 1-8 drop configurable manifold system with rapid lead times.

A highly economical solution suitable for processing commodity resins for simple, cost sensitive applications such as consumer goods, small home appliances, basic automotive components, electronic peripherals/accessories and more.

[Learn More](https://www.dmeeu.com/page/403-eco-one-series-standardized-hot-runner-melt-delivery-system)

EcoONE-Series - hot runner melt delivery system

The next evolution of DME hot runner solutions

StellarONE **combines the best of DME's legacy systems with today's hot runner technology**. Available in both thermal and valve gate configurations, six flow paths and several gate options, the modular StellarONE is an incredibly flexible and competent hot runner system supporting a very wide range of resins, including many complex engineering resins.

StellarONE is a true global platform, with service and component availability in Europe, North America and Asia. **Designed to compete with advanced systems yet reasonably priced.**

**Main benefits:**
- precision temperature
- more processing control
- extreme durability
- global support

[Learn more](https://www.dmeeu.com/page/402-stellar-one-hot-runner-melt-delivery-system)

Introducing StellarONE

DME Dura Core is a solution delivering lower costs while retaining the high performance of DME S-Core in most applications.

DURA CORE is an innovative collapsible core design: a groundbreaking two-piece spring collapsible core designed for precision and longevity. This advanced collapsible core features a unique sequential collapse mechanism, where the larger and smaller segments operate independently. This distinct design ensures stress-free movement of the smaller segments, significantly enhancing the lifespan of the DURA CORE.

**Main benefits:**
- Sequential Opening
- Two-Piece Design
- Compact Safety Ring
- Straight Core Pin Use
- Minimized Core Length

[Read More](https://www.dmeeu.com/page/425-dme-dura-core-spring-collapsible-core)

Dura Core - Collapsible Core

We are expanding our range of flat ejector pins, adding over 1900 new sizes across FK, FW, F2R, and F4R types and also 7 new categories.

New and enhanced flat ejector pins categories:
- FK - hardened flat ejector pin - new sizes added
- FW - nitrided flat ejector pin - new sizes added
- F2R - flat ejector pin with 2 radii - new sizes added
- F4R - flat ejector pin with 4 radii - new sizes added
- F2RC - F2R design with DLC coating (NEW)
- F4RC - F4R design with DLC coating (NEW)
- F2RL - flat ejector pin with 2 radii and long blade (NEW)
- F4RL - flat ejector pin with 4 radii and long blade (NEW)
- F2RLC - flat ejector pin with 2 radii and long blade and DLC coating (NEW)
- F4RLC - flat ejector pin with 4 radii and long blade and DLC coating (NEW)
- FKLB - hardened flat ejector pin with long blade (NEW)

This expansion is part of our ongoing commitment to providing you with the most comprehensive selection of components in the industry.

[Buy in eSTORE](https://store.dme.net/mould-ejection?utm_source=dmeeu&utm_medium=referral)

New flat ejector pins

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2025. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. Selected items are available for a special price - special offer is valid for a limited time period.

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts?utm_source=dmeeu&utm_medium=referral)

[Promo leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_ds25promo_824ef59ee2.pdf)

Promo - 2025 date stamps and inserts

Take advantage of a limited-time offer from DME Europe

Take advantage of a limited-time offer from DME Europe. We're offering a special 15% discount on our entire range of Workshop Equipment (excluding the CleanCare devices). Promo prices are valid both online and when ordering through our sales teams.

[More information here](https://store.dme.net/save-now-on-workshop-equipment#)


Save now on Workshop Equipment (MRO)

Automatic Date Stamps, operated by pressurized air, can change position after every part ejection, enabling the tracking of each individual part.

This reliable and easy-to-implement solution enhances your ability to seize opportunities from customers and industries that demand maximum traceability of part manufacturing history.

[Order online here](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatic Date Stamps

Products in our eSTORE

thumbnail_img-icon-services.png

img-icon-services.png

large_img-estore-visual.jpg

medium_img-estore-visual.jpg

small_img-estore-visual.jpg

thumbnail_img-estore-visual.jpg

img-estore-visual.jpg

estore-mould_bases_plates.svg

DME brings you wide range of sizes and steel with quick deliveries of mould bases and plates both standard & custom.

Mould Bases and Plates

Formy & Desky - Standardní i customizované | Normalien

Bases de moule et plaques

Formaszerszám-alapok és -lemezek

Bases y placas de moldes

Formen & Platten

Matrijshuizen en platen

Korpusy form i płyty

Basi di stampo e piastre

thumbnail_img-icon-plates1.png

img-icon-plates1.png

estore-mould_components.svg

Select from a wide range of high quality mould components, available as standard, pre-engineered or custom. DME is your one-stop-shop for injection moulding.

Standard and Customized Mould Components

Komponenty Forem | Standardní i na zakázku | Normalien

Komponenty form

Composants de moule

Formaszerszám-tartozékok

Componentes de moldes

Komponenten

Matrijsonderdelen

Componenti di stampo

Mould Components

thumbnail_img-icon-components1.png

img-icon-components1.png

estore-industrial_supplies.svg

Suministros industriales

Ipari ellátás

Przemysłowe materiały eksploatacyjne

Werkstattbedarf

Forniture industriali

Dílenské potřeby

 Industriële verbruiksgoederen

Workshop Equipment

thumbnail_img-icon-mro1.png

img-icon-mro1.png

estore-hot_runners.svg

Řízení a optimalizace tepelné výměny

Thermisch beheer en optimalisatie

Gestión térmica y optimización

Thermomanagement und Optimierung

Thermal Management

estore-die_sets.svg

A complete range of plates, die blocks, retainer sets, punches and other die components offers many ways to increase your productivity.

Die Sets

Stanzwerkzeuge

Stempelhuizen/Stansvormen

Formaszerszám (présszerszám) készletek

Zestawy matryc

Juegos de matrices

Jeux de matrices

Set di stampi

Střižné nástroje

thumbnail_img-icon-dies1.png

img-icon-dies1.png

estore-polishing.svg

Surface finishing is a process that requires a variety of tools and materials. We have everything from rough to fine polishing available for dies, stamping and die-casting tools.

Polishing devices and equipment from DME Europe

Polerowanie

Pulido

Oberflächebearbeitung

Polissage

Polijsten

Leštění

Polírozás

Levigatura

Polishing

thumbnail_img-icon-polishing1.png

img-icon-polishing1.png

Produits dans notre boutique en ligne

Producten in onze eSTORE

Productos de nuestra tienda en línea

Produkty v našem eSTORE

Prodotti nel nostro eSTORE

Produkty w naszym sklepie eSTORE

Online áruházunk termékkínálata

Az egymásra helyezhető nyomatlemez-irányítás legújabb generációja

A DME új golyósorsós központozó berendezésének újszerűen kialakított formája precíz mozgást és kisebb súrlódást tesz lehetővé az egymásra helyezhető rétegű öntőformák gördülékeny nyitásához / zárásához.

A DME ugyanazt a precíz mérnöki koncepciót hozta, amit évek óta tapasztalhatunk náluk a CNC-szerszámgépek esetében. Ez a termék könnyed személyre szabhatóságot biztosít a különféle alkalmazásokhoz, ugyanakkor könnyedén beszerezhető. Egyszerű, az egymásra helyezett öntőformák magasságig terjedő méretre vágási és csavaros megoldások gyors és könnyű összeszerelhetőséget és drasztikusan lecsökkentett átfutási időt eredményeznek. Akár 2 méter / másodperc nyitási arány eltünteti a ciklusidőre jellemző korlátozó tényezőket.

[Bővebben](https://www.dmeeu.com/hu/page/305-dme-ez-stack-ball-screw-centering-device-8)

EZ Stack golyósorsós központozó berendezés

Controllo delle piastre portastampi impilate di nuova generazione

Il design avanzato brevettato del nuovo dispositivo di centraggio con vite a ricircolo di sfere DME garantisce un movimento preciso e un attrito ridotto per un'apertura/chiusura fluida degli stampi impilati.

DME ha adottato lo stesso preciso concetto ingegneristico utilizzato per anni nella lavorazione con macchine a controllo numerico. Questa unità può essere facilmente adattata alla vostra applicazione, grazie alla disponibilità di prodotti di serie. Il semplice taglio a misura dell'altezza della pila di stampi e le caratteristiche di avvitamento consentono un'installazione rapida e semplice, riducendo drasticamente i tempi di consegna. Con una velocità di apertura di fino a 2 metri al secondo, non ci saranno limitazioni sui tempi di ciclo.

[Ulteriori informazioni](https://www.dmeeu.com/it/page/304-dme-ez-stack-ball-screw-centering-device-7)

Dispositivo di centraggio con vite a ricircolo di sfere EZ Stack

Kolejna generacja sterowania zestawów płyt

Zaawansowana i opatentowana konstrukcja nowego urządzenia do centrowania śrub z nakrętką kulową zapewnia precyzję ruchu oraz redukcję tarcia na rzecz płynnego otwierania/zamykania zestawów form.

Firma DME zastosowała koncepcję precyzyjnej obróbki stosowaną od lat w obrabiarkach CNC. To urządzenie można łatwo dostosować do indywidualnych potrzeb użytkownika i jest ono dostępne od ręki. Proste docięcie na długość zgodną z wysokością zestawu form oraz możliwość mocowania śrubami pozwalają na szybką i łatwą instalację oraz ogromną redukcję czasu realizacji. Dzięki szybkości otwierania do 2 metrów na sekundę nie występują żadne ograniczenia czasu cyklu.

[Czytaj więcej](https://www.dmeeu.com/pl/page/303-dme-ez-stack-ball-screw-centering-device-6)

Urządzenie do centrowania śrub z nakrętką kulową EZ Stack

Řízení stohovací formy nové generace

Pokročilá patentovaná konstrukce nového centrovacího zařízení s kuličkovým šroubem DME zajišťuje přesný pohyb a snížené tření pro hladké otevírání/zavírání stohovací formy.

Společnost DME nasadila stejné technické řešení, které se již léta používá při obrábění na CNC. Tuto jednotku lze snadno přizpůsobit vaší aplikaci, aby ji bylo možno po dodání ihned namontovat. Jednoduché zkrácení na délku podle výšky stohovací formy a šroubovací prvky umožňují rychlou a snadnou instalaci s výrazně zkrácenými dodacími lhůtami. S rychlostí otevření až 2 metry za sekundu nebudete mít žádná omezení týkající se doby cyklu.

[Přečíst více](https://www.dmeeu.com/cs/page/302-dme-ez-stack-ball-screw-centering-device-5)

Středící jednotka EZ Stack s kuličkovým šroubem​

De volgende generatie etage matrijzen controle

Het geavanceerde gepatenteerde ontwerp van de nieuwe DME kogelomloopspindel zorgt voor een nauwkeurige beweging en minder wrijving voor een soepel openen/sluiten van uw stapelmatrijs.

DME maakt gebruik van hetzelfde nauwkeurige engineeringconcept dat al jaren in de CNC-verspaning wordt gebruikt. Dit apparaat is eenvoudig op maat te maken voor uw toepassing en is snel leverbaar. Door een eenvoudige aanpassing aan de hoogte van de matrijs en het gebruik van boutverbindingen kan de installatie snel en eenvoudig gebeuren, met doorlooptijden. Met een openingssnelheid tot 2 meter per seconde zijn er geen beperkingen op de cyclustijd.

[Meer lezen](https://www.dmeeu.com/nl/page/301-dme-ez-stack-ball-screw-centering-device-4)

EZ Stack Etagematrijs syncronisatie

La nueva generación de controles de placas de molde de pisos

El diseño patentado avanzado del nuevo dispositivo de centrado con bolas circulantes DME ofrece un movimiento preciso y menor fricción para lograr la apertura/cierre suave del molde de pisos.

DME ha implementado el mismo concepto preciso de ingeniería utilizado durante años en el mecanizado CNC. Esta unidad se adapta fácilmente al uso que necesite con las existencias de almacén. Un simple corte longitudinal de la altura del piso del molde y las características de pernado permiten una instalación rápida y sencilla, con unos tiempos de preparación mucho más reducidos. Con un ritmo de apertura de hasta 2 metros por segundo, no se restringirá el tiempo del ciclo.

[Leer más](https://www.dmeeu.com/es/page/300-dme-ez-stack-ball-screw-centering-device-3)

Dispositivo de centrado con bolas circulantes EZ Stack

La nouvelle génération de contrôle des plaques de moules à étages

La conception avancée et brevetée du nouveau dispositif de centrage à vis à billes de DME permet un mouvement précis et une friction réduite pour une ouverture/fermeture en douceur de votre moule à étages.

DME a déployé le même concept d'ingénierie précis utilisé depuis des années dans l'usinage CNC. Cette unité est facilement adaptable à votre application grâce à sa disponibilité de stock. Une simple coupe à la longueur du moule à étages et les dispositifs de verrouillage permettent une installation rapide et facile avec des délais d'exécution considérablement réduits. Avec un taux d'ouverture pouvant atteindre 2 mètres par seconde, il n'y aura aucune restriction sur le temps de cycle.

[Pour en savoir plus](https://www.dmeeu.com/fr/page/299-dme-ez-stack-ball-screw-centering-device-2)

Dispositif de centrage à vis à billes EZ Stack

Die nächste Generation der Etagenformplattensteuerung

Das fortschrittliche, patentierte Design der neuen DME-Kugelumlaufzentrierspindel sorgt durch präzise Bewegung und reduzierte Reibung für ein reibungsloses Öffnen/Schließen Ihrer Etagenform.

DME nutzt das gleiche präzise technische Konzept, das seit Jahren in der CNC-Bearbeitung verwendet wird. Diese Vorrichtung kann leicht an Ihre Anwendung angepasst werden und ist ab Lager lieferbar. Ein einfacher Zuschnitt auf die Höhe der Etagenform und die Möglichkeit zum Anschrauben beschleunigen und vereinfachen die Installation und reduzieren die Vorlaufzeiten deutlich. Mit einer Öffnungsrate von bis zu 2 Metern pro Sekunde gibt es keine Einschränkungen bei der Zykluszeit.

[Lesen Sie weiter](https://www.dmeeu.com/de/page/298-dme-ez-stack-ball-screw-centering-device-1)

EZ Stack Kugelumlaufzentrierspindel

large_img-new-ezs.jpg

medium_img-new-ezs.jpg

small_img-new-ezs.jpg

thumbnail_img-new-ezs.jpg

img-new-ezs.jpg

A pontos nyomon követhetőség egyszerűbbé tétele

A nyomás alatt lévő levegővel működtetett automatikus dátumbélyegzők minden egyes alkatrész-kidobás után képesek pozíciót változtatni, lehetővé téve az egyes alkatrészek nyomon követését.

Ez a megbízható és könnyen megvalósítható megoldás növeli az Ön képességét, hogy megragadja az olyan ügyfelek és iparágak által kínált lehetőségeket, amelyek megkövetelik az alkatrészgyártás történetének maximális nyomon követhetőségét.

[Vásárolja meg az eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatikus dátumbélyegzők

I datari automatici, azionati da aria pressurizzata, possono cambiare posizione dopo ogni espulsione del pezzo, consentendo la tracciabilità di ogni singolo pezzo.

Questa soluzione affidabile e facile da implementare aumenta la capacità di cogliere le opportunità offerte da clienti e settori che richiedono la massima tracciabilità della storia di produzione dei pezzi.

[Acquistate nell'eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Timbri automatici della data

Precyzyjna identyfikowalność stała się prostsza

Automatyczne datowniki, obsługiwane przez sprężone powietrze, mogą zmieniać pozycję po każdym wyrzuceniu części, umożliwiając śledzenie każdej pojedynczej części.

To niezawodne i łatwe do wdrożenia rozwiązanie zwiększa możliwości wykorzystania ze strony klientów i branż, które wymagają maksymalnej identyfikowalności historii produkcji części.

[Kup w elektronicznym sklepie eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatyczne datowniki

Precizní tracking jednoduše a spolehlivě

Automatické datumovky, ovládané stlačeným vzduchem, mohou měnit polohu po každém vyhození dílu, což umožňuje precizní zpětné sledování vaší výroby.

Toto spolehlivé a snadno implementovatelné řešení zvyšuje vaši schopnost získat zakázky od zákazníků a průmyslových odvětví, vyžadujících maximální dohledatelnost historie výroby dílů.

[Koupit online](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatické datumovky

Nauwkeurige traceerbaarheid nog eenvoudiger

Automatische datumstempels, bediend door perslucht, kunnen van positie veranderen na elke uitwerping van een onderdeel, waardoor elk afzonderlijk onderdeel getraceerd kan worden.

Deze betrouwbare en eenvoudig te implementeren oplossing vergroot uw mogelijkheden om kansen te grijpen van klanten en industrieën die maximale traceerbaarheid van de productiegeschiedenis van onderdelen eisen.

[Koop in de eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatische datumstempels

Los insertos fechadores automáticos, accionados por aire a presión, pueden cambiar de posición después de la expulsión de cada pieza, lo que permite el seguimiento de cada una de ellas.

Esta solución fiable y fácil de implementar mejora su capacidad para aprovechar las oportunidades de clientes y sectores que exigen la máxima trazabilidad del historial de fabricación de piezas.

[Compre en nuestra eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Insertos fechadores automáticos

Les inserts automatiques, actionnés par de l'air sous pression, peuvent changer de position après chaque éjection de pièce, ce qui permet de suivre chaque pièce individuellement.

Cette solution fiable et facile à mettre en œuvre améliore votre capacité à saisir les opportunités offertes par les clients et les industries qui exigent une traçabilité maximale de l'historique de fabrication des pièces.

[Achetez dans la boutique eSTORE](https://store.dme.net/ads-automatic-date-stamps-eu)

Products

New Products

Use DME Solution Finder to find exactly the product you need

Order Online 24/7

Stay up to date

Company

Solutions

Products

Resources

More

Products

New Products

Use DME Solution Finder to find exactly the product you need

Order Online 24/7

Stay up to date

Company.css-1o6uc2o{width:1.25rem;height:2px;background-color:#0081c3;display:none;margin-top:0.5rem;}@media (min-width: 768px){.css-1o6uc2o{display:block;}}

Solutions

Products

Resources

More

Company